The Hunter collection brings a new style to reclining furniture. Many details including the attached pillow at the top of the backrest, fabric panel along the arm and stitching detail along the bottom of the footrest helps to create an inviting feeling to this series. Classy enough for your main living room, but also comfy enough for your tv room. This series is dual-functioning, with a motorized reclining feature as well as a motorized headrest, enabling you to find your perfect comfort spot.

BACK REST

• All the backs of our reclining furniture are removable for better mobility.

FILLING

• 100% new polyester fibre.
• Curled fibre for a better resiliency, so it retains its shape longer (6 ripples per inch).
• Silicone treated to avoid fibres bunching up together.
• Fibre is empty like a straw to allow air to flow through for more abundance.
• No recycled fibre is used because resiliency is not as good.

FRAME

• Superior construction grade spruce plywood which is dried better and doesn’t warp or crack.
• We combine materials and make choices according to the application to ensure strength and durability of the furniture. The wood pieces systematically interlock during the assembly process which creates a strong, reinforced structure.
• In the areas of the frame that need to withstand more pressure, we use TimberStrand®. It’s an engineered wood currently used to make “H” beams in houses because of its strength. Doesn’t change with variations in humidity and temperature.
• Our frames have a “L” shaped piece that joints the back of the arm to the seat. This piece stops the pivot point on that joint and reinforces the frame.

HANDLE

• Direct drive action.
• Equal weight distribution, because both sides of the mechanism work simultaneously.
• The other advantage of the external handle is the assistance to close the footrest.
• External versus internal handle = only a question of design.
• Introduction of a new internal handle: Easier to use and more resistant.

MECHANISM

• Leggett & Platt is the world leader in this 6 billion $ industry. We work in co-development with them.
• Exclusivity on the design of the mechanism.
• The constant evolution of the design of the mechanism to enhance performance, fluidity and function.
• Manufactured in the United States, we invest a little more money to get a thicker grade of metal, therefore a better quality and durability for our mechanism.
• The usage of self-tapping screws reduces the risk of loose connections because they actually bite into the metal.
• Adjustable legs on rocking chairs.
• Swivel bases available on most rocking chairs.

SEAT FOAM

• High quality foam (Density = 2.05 lb/ft³). The competition uses foams that vary from 1.5 to 1.9 lb/ft³.
• The compression of the foam is the equivalent of flexibility and comfort (33-38 lb/in²) average 36 lb/in².
• Our foam is pre-crushed which allows it to have better comfort upon reception of the furniture.
• We use high quality No Sag springs with a metal rod linking all of them for better weight distribution.
• Felt is installed between the springs and the foam to lengthen their life expectancy.

SWIVEL BASE

• Swivel base available on most of our rocker recliners at a minimal cost.
• Easy to install.
• The swivel base allows the chair to rotate 360 degrees or 160 degrees for our motorized recliners.